You can read about the whole story in my Tool Boxes, Quest for the Best and Quest for the Best Tool Box Part II.

But here’s what you’ve been waiting for, The Best DIY Tool Box Organizers!

These new toolbox/organizers come in three sizes to accommodate all your storage needs.

They’re made of heavy duty plastic, have adjustable sections for easy customizing, a clear lid to see all your tools or parts, a good strong, wide handle, and the lid closes tight against the dividers so nothing can not jump from one section to another—even if dropped.

And, they’re stackable, so you save tons of space.

Large Tool Box / Organizer

This large tool box will easily hold all the hand tools you use most often, plus a few others. Now it’ll be easy to carry your tools to your project and quickly find the tools you need.

20″ W x 12–5/8″ D x 2–5/8″ H // Cost: $22.99 each Order Here

Here are the same tools from The Absolute Essential Tools Every Do-It-Yourselfer Must Own PDF laid out here, plus a few more.

Download your free DIY Essential Tools PDF for a full list of the essential tools every DIY’er should own.

Now, here’s all those tools neatly stored and ready for easy transport.

It’s just amazing how many tools can be stored and easily accessed from one tool box.

You can stack three of these boxes in the same space as one regular tool box. Definitely one of the best do-it-yourself tool box/organizers you’ll find, buy, and happily use.

Medium Tool Box / Parts Organizer

The medium organizer is great for holding fasteners, electrical gear, technician tools, or whatever you need to keep sorted and transport securely. Great size!

Note: All the yellow dividers are removable.

15–1/2″ W x 11–5/8″ D x 2–1/2″ H // Cost: $17.99 each Order Here

Small Tool Box / Parts Organizer

I use this smaller organizer to hold my stainless fasteners, and other specialty items. Perfect fit!
Note: 9 total compartments-1 full, 2 lg, 2 md, 4 sm.
12–7/8″ W x 9–3/8″ D x 2″ H // Cost: $9.99 each Order Here

You can order your DIY tool box organizers through this Direct Link. When you reach the site just type in “parts organizers” in the search bar and there you go.

And Yes, I did talk to the manufacturer and they reassured me that these boxes will not be discontinued anytime soon. So get organized and you too will succeed with speed.

10/21/09 UPDATE

I have just been advised, by the Stanley product manager, that the original Workforce tool box/organizers (14006) have been re-released and will be available at Target stores to start. Stanley promised to advise me of other locations that the box will be available at ASAP.

Note that the boxes you see on Lowes and Home Depots site are not the original boxes. They are the new ones with the fixed center section.

Thanks for your patience and please let me know if you have any questions.

DIY article from: DIYAnswerGuy.com. Don't forget to follow me (@DIYAnswerGuy) on Twitter for more DIY answers. Thanks!

New DIY Tool Box Sighted and Captured

I’d like to share a little story with you that involves my neighbor Mike who lives through the woods, right behind my house. He’s not your average retired guy as he always has some kind of do-it-yourself project going on. This time he was looking for an effective solution to insulate his garage workshop.

Just a little background on my friend Mike. He spent 30+ years working as a machinist for the Navy. And Mike wasn’t just any ole machinist, he worked on the nuclear propulsion systems on Submarines and Carriers. Mike’s also a rough and tumble Alaskan gold miner and can build or repair just about anything.

Well, not to long ago, Mike invites me over to talk with him about coming up with a solution for insulating his workshop doors. He says if we use the 1/4 of a brain we each have, we should be able to come up with a solution. Funny guy.

His metal garage workshop doors are a pair of 10 ft. wide x 14 ft. tall flat framed 2x4 doors with sheet metal cladding on the exterior.

The doors also bypass each other to open (clearance between them is only about 1/4 inch) making it difficult to apply standard insulation to the doors.

Well, after some discussion, I recommended using Prodex radiant barrier insulation on his shop doors. This is an excellent insulation material I’ve used on another garage door insulation project.

Since Prodex is only 1/4 in. thick, he simply cut each section of insulation a bit taller than the space between the 2x4’s. That way, the insulation could be stapled to the 2x4 framing as well as siliconed directly to the metal.

Prodex recommends creating an air space to increase the effectiveness of the product, but we didn’t have that option due to the extremely small clearance between the sliding doors. Having said that, an air space was naturally provided by the 50% corrugation of the metal cladding.

Notice that foil tape was applied on all insulation seams.

In the end, the shop doors easily open and look great too. Now, not only is Mike using less energy to heat and cool his workshop but the reflective qualities have improved his garage workshop lighting and created a more comfortable place to work.

So even if you’re a brilliant and resourceful guy like Mike, but still have a question about your project, just ask your personal DIY consultant, and I’ll find the answer to help you succeed with speed.

Here’s a link for more information on Prodex including installation instructions.

Workshop Plans

US Auctions Australian Auctions Austrian Auctions Belgian Auctions Canadian Auctions French Auctions German Auctions Hong Kong Auctions Indian Auctions Irish Auctions Italian Auctions Dutch Auctions Polish Auctions Singapore Auctions Spanish Auctions Swiss Auctions UK Auctions

Best Match Time: ending soonest Time: newly listed Price: lowest first Price: highest first Price + Shipping: lowest first Price + Shipping: highest first

3800 ULTIMATE WOODWORKING PLANS COLLECTION on DVD

5.39

Plans How To Build Concrete Cement Basement Footings Garage House Shed Any Size

3.29

12 x 16 Garage Workshop Building Project Plans 51216

19.95

Plans How To Build Your Own Wood Joist Floor for House Barn Shed Any Custom Size

3.69

6 Plans How To Build Your Own Cabin Storage Shed House Frame Gable Ridge Roof

15.39

VINTAGE 1982 PLAN BUILD A JOINERS TOOLCASE 4 WORKSHOP

4.80

6 bedroom 2 storey house floor plans blueprints SALE

395.00

1965 BOOKLET FLYING CHIPS ROCKWELL SAWS PROJECT PLANS

10.00

Plans To Show How To Install Horizontal Vertical Vinyl Siding House Garage Shed

3.98

Complete House Plans 2217 sq ft 3 beds 25 baths

177.36

Complete House Plans 900 sq ft garage plan

24.95

38x24 2 Car Garage Building Blueprint Plans w Work Shop Walk up Storage Loft

89.95

VINTAGE 1986 PLAN FLIP TOP BENCH FOR COMPACT TOOLS

4.80

VINTAGE 1988 PLAN ADD ON SOLAR GREENHOUSE ENVIRONMENTAL

4.80

HOME DESIGN CONSULTING DRAFTING SERVICE BY THE HOUR

35.00

1

DIY article from: DIYAnswerGuy.com. Don't forget to follow me (@DIYAnswerGuy) on Twitter for more DIY answers. Thanks!

DIY Garage Workshop Insulation