John asked Presently in the planning stages of a basement renovation project. I'm planning to renovate half of the basement. Large open room with half bath. I've already gutted the basement, and need to have some rough plumbing done before things start. I have my...
How to Safely Hang a Ceiling Fan
Rudy asked Can I use anchors to hang a ceiling fan? If so, which ones would you recommend? DIY Answer Guy Hi Rudy, Anchors are not really appropriate for hanging ceiling fans as fans are quite heavy. If there isn't an electrical box already mounted in the ceiling...
How to remove a broken EZ-anchor
Jay asked I was installing a hook rack in the bathroom today using the plastic 75 pound ez anchors. I had about 3/4 of the anchor into the drywall when I noticed I hit a wall stud. I attempted to remove the anchor and I got about half a turn when it snapped off down...
Expanding patio with pavers. How much clearance is recommended?
Expanding a back porch/patio area to create more “hard” surface for seating, eating, and cooking. How much clearance is recommended or required from the bottom of the door frame/opening to the top of the pavers?
Faced or un-faced fiberglass Insulation?
Learn the difference between Faced and Unfaced insulation and where it used.
How to fix a leaky washing machine hose
Step-by-step instructions on how to fix a leaky washer hose.
How to repair worn carpet
Amanda’s carpet has some worn spots that are in need of repair. To do-it-yourself, you’ll need a carpet seam iron and….
How to connect a ridged clothes dryer vent through the wall
DIY Question. How do I replace a PVC clothes dryer vent with ridged galvanized aluminum pipe? Answer: First you’ll want to …
How to remove an EZ anchor with the screw head broken off
While trying to install a decorative shelf using plastic, EZ self-drilling dry wall anchors, the screw head broke off. I recommended that she…
How to reinforce drywall for towel bars
There are holes and the drywall is soft where my towel bar used to go. How do I repair and reinforce this area? Start by cutting…